Update: Unified Command Begins Removal of Barges from Houston Ship Channel

HOUSTON – As of 8:20 a.m. today, the Unified Command responding to last week’s collision between a tanker and two barges near Bayport, Texas, has begun removal of both barges from the Houston Ship Channel.

The decision follows successful removal of the remaining gasoline blend product onboard the Kirby barge 30015T which was struck by the tanker Genesis River last Friday afternoon. Late Tuesday afternoon it was determined that the MNI 3041 barge, aground and submerged in the water as a result of the incident, could also be safely floated and moved to shore without removal of its product. The entire movement is expected to last approximately four hours.

Air and water quality monitoring will take place throughout transit and following the transit process. An adequate supply of containment boom will also be available on scene as a precautionary measure.  Existing containment and absorbent boom in place along sensitive shoreline areas will remain in place.

Skimmer boats and the Port of Houston fire boat will be on standby to provide rapid response if needed. All other navigation in the ship channel will be suspended during the complete transit process.

The damaged barge will be taken to the Southwest Shipyard at Channelview while the other barge will be towed to the Barbour’s Cut Turning Basin.  Both barges will undergo thorough decontamination to remove all residue from any of the gasoline blend stock from their hulls. The MNI 3041 undamaged barge will be lightered at the Barbour’s Cut.

Editor’s note: Both shipyards are private property and are not accessible without the permission of the property owners. 

8:45 a.m.
May 15, 2019